Chilipepper Technical Specifications
Complete specifications for the Chilipepper CP6000, a green
plumbing product that saves water.
Dimensions are in Inches
High RPM Universal Brush with ball bearings
input horsepower intermittent duty
115 Volts AC 60 Hz
Typical current draw: (load dependent) 2.5 amps
Current draw on standby: 0.007 amps
Thermally protected, automatic reset
Material: Glass filled Celcon GC-25
Maximum working pressure: 125 Psi
Maximum working temperature 140 degrees Fahrenheit
Internal spring loaded check valve
Maximum run time: approx.
Externally adjustable shut off
Lockout when water temperature in pump is over 96 degrees.
Control voltage to button:
5 volts - 1 milliamp current flow under short circuit conditions.
Power cord length - 6 feet. 3 prong grounded plug.
Control cable length - 6 feet.
height above mounting surface 3-7/8 inches.
Maximum Width: (outside of rubber foot mounts) 6 inches.
Transformer for 240 volt step down to 120 volts
transformer with a rating of 500 VA or larger.